INTER TECH Engineering & Trading Sdn Bhd

AEROSEAL Sdn Bhd

Address : 14 & 16, Jalan Sungai Rasau 39, Kawasan 16, 41300 Klang, Selangor, Malaysia.

Telephone : 03-3341 2310 & 3341 8251

Email : lim.intertech@gmail.com

Contact : +6012-2888 921 (Whatapps Only)

Waze Location : Click Here

  • Grey Facebook Icon

Flexible Packing Hook Pullers (Extractor)

Toughened Flexible Spring Steel

Saves labor when removing packings from stuffing boxes
Flexible design for easy access to hard-to-get-at areas
Available in a range of sizes to meet all requirements

GFO (PTFE Teflon Graphite)

100% Gore Fibre Packing

Provides long life and water efficiency in rotating equipment applications.

100% Gore filament yarns and a silicone break-in lubricant.

FEATURES AND BENEFITS

  • Does not fray when cut

  • Easy to install

  • Good thermal conductivity

  • Speed capability

  • Chemical resistance

  • Low coefficient of friction

  • Low coefficient of thermal expansion

SPECIFICATIONS

  • Min. Temperature            -200°F / -129°C

  • Max. Temperature:            550°F / 287.8°C

  • Max. Rotary Pump Pressure:    300 psi / 20.7 bar

  • Max. Valve Pressure        2,000 psi / 137.9 bar

  • Max. Rotary Pump Speed:    4,000 fpm / 20.32 m/s

 

APPLICATIONS

  • Acids

  • Alkalis

  • Aromatic and aliphatic solvents

  • Alcohols

  • Esters

  • Petroleum and synthetic oils

  • Steam

  • Water

  • Aqueous solutions

  • Air and dry industrial gases

Carbon Fibre

Carbon With Fibre

Packing that controls your maintenance costs, without compromising performance.

Made from a 95% carbon assay, aerospace-grade fiber, coated with PTFE throughout.

Provides a low coefficient of friction and high thermal conductivity, so your process runs cooler and the packing lasts longer.

FEATURES AND BENEFITS

  • Excellent cost/use ratio

  • Ideal for most industrial equipment

  • Compatible with a wide variety of chemicals

  • Easy to install and remove

SPECIFICATIONS

  • Min. Temperature: -328°F

  • Max. Temperature: 600°F

  • Max. Rotary Pump Pressure: 500 PSI

  • Max. Rotary Pump Speed: 3,000 FPM

APPLICATIONS

  • Power generation

  • Chemical and petrochemical

  • Pulp and paper

  • Primary metals

  • General industrial use

Pure Graphite

Flexible Pure Graphite, Available With Inconel WIre

FEATURES AND BENEFITS

  • Low abrasion and high chemical resistance for long service life

  • Ideal where contamination is prohibited, as in pulp and paper industry

  • Low chloride certification available

SPECIFICATIONS

  • Min. Temperature:            -328°F / -200°C

  • Max. Temperature:         600°F / 315.5°C

  • Max. Rotary Pump Pressure:    500 psi / 34.5 bar

  • Max. Rotary Pump Speed:    3,000 fpm / 15.24 m/s

APPLICATIONS

  • Valve stems

  • Slip-type expansion joints

  • Mixers

  • Agitators

  • Reactors

  • Autoclaves

  • Centrifugal pumps

  • Hydroelectric turbines​

Aramid

Graphite/PTFE With Aramid Corners

Applications

  • Long-lasting

  • High-performance

  • Universal packing

  • All rotary, reciprocating and static gland applications.

Features

  • Virtually eliminates Shaft wear

  • Long lasting and high performance sealing

  • Near universal packing, for use in all rotary, reciprocating and static gland applications

  • Negligible extrusions and Gland maintenance, even in the most arduous of applications

Operating Limits

  • Pressure Rating: 250 Bar

  • Rotary Speed: 20 m/s

  • Temperature: -100˚C to +280˚C

  • pH Range: 0 - 14

Kevlar

PTFE Suspensoid And Premium Silicone Oil

Applications

  • Rotary and reciprocating pumps, stern glands, hydraulic presses, mixers and valves

  • Against abrasive slurries, sewage, effluents, water, oils, solvents & chemicals.

  • Non-staining lubrication and resilient performance

  • Ideal for use in the paper industry.

Features

  • High concentration of resilient, food quality lubricants and Heavy PTFE dispersions

  • Significant reduction in Shaft wear problems

  • Long packing life with extended periods between necessary gland adjustments

  • Rotary and reciprocating pumps, stern glands, and hydraulic presses, mixers and valves

Operating Limits

  • Pressure Rating: 150 Bar

  • Rotary Speed: 20 m/s

  • Temperature: -100˚C to +280˚C

  • pH Range:1-13

Pure PTFE Teflon

FDA Food Grade

Made from high purity PTFE filament lubricated with mineral oil.

Highly resistant to chemicals and suitable for use in caustic service.

Recommended for use in rotary food processing equipment such as pumps, dryers, blenders, mixers, and cookers, as well as acidic mining pumps.​

FEATURES AND BENEFITS

  • Ideal for food processing applications

  • Pliable, wear-resistant and dimensionally stable

  • Resists most caustic media

SPECIFICATIONS

  • Min. Temperature:            -450°F / -267.8°C

  • Max. Temperature:            500°F / 260°C

  • Max. Rotary Pump Pressure:    300 psi / 20 bar

  • Max. Rotary Pump Speed:    1,500 fpm / 8 m/s

  • PH Range:                 0-14

APPLICATIONS

  • Food processing equipment

  • Pumps

  • Dryers

  • Mixers

  • Cookers

  • Acidic mining pumps

PTFE Teflon Asbestos

PTFE With Asbestos

Formed by inter braided method from fine white asbestos yarn to foam very dense and flexible packing.

Each thread is individually impregnated with PTFE lubricants.​

FEATURES AND BENEFITS

  • General purpose

  • All rotating and reciprocating pumps, mixers and valves sealing

SPECIFICATIONS

  • Min. Temperature:            -450°F / -267.8°C

  • Max. Temperature:            500°F / 260°C

  • Max. Rotary Pump Pressure:    300 psi / 20 bar

  • Max. Rotary Pump Speed:    1,500 fpm / 8 m/s

  • PH Range:                 0-14

APPLICATIONS

  • Chemical

  • Solvents

  • Oils

  • Petroleum

  • Oxygen

Please reload